Адрес e-mail:


N9923A FieldFox Handheld RF Vector Network Analyzer, 6 GHz

  • Carry the world’s most accurate handheld RF T/R VNA analyzer
  • Save time by simultaneously measuring all four S-parameters (S11, S21, S12, S22) with a single connection
  • Expand capabilities with optional 2-port VNA, time-domain, vector voltmeter, cable and antenna analyzer and more
  • Perform accurate testing with QuickCal, full 2-port unknown thru Cal, TRL
  • Easily measure average and pulse power with a USB power sensor
  • Lightest handheld VNA at only 6.2 lb. (2.8 kg)
  • Maximum Frequency 6 GHz
  • Dynamic Range  100 dB
  • Output Power  5 dBm
  • CAT/VNA Start Frequency 2 MHz
  • Number of Built-In Ports 2 ports
  • Instrument Type Vector Network Analyzer
  • Cable and Antenna Analyzer Yes - Standard
  • Additional CAT/VNA Based Features: QuickCal (Subset), Vector Voltmeter, Mixed-Mode S-Parameters
  • Additional SA Based Features Built-In Power Meter
  • Handheld/Modular - Yes
  • System Features GPS Receiver - External Only
N5232B PNA-L Microwave Network Analyzer, 300kHz - 20 GHz
  • Perform basic analysis of passive components and simple active devices
  • Measure S-parameters with good accuracy up to 20 GHz in cost-sensitive applications
  • Get the world’s best price-to-performance ratio for microwave manufacturing
  • Configure an economical solution for signal-integrity measurements and materials characterization
  • Accelerate insight into component behavior using a multi-touch display and intuitive user interface
  • Maximum Frequency 20 GHz
  • Dynamic Range  133 dB
  • Output Power  13 dBm
  • Trace Noise 0.004 dBrms
  • Number of Built-In 4 ports
  • Harmonics -18 dBc
  • Noise Floor -120 dBm
  • Best Speed at 201 Point, 1 Sweep 6 ms
DSOX3104T Oscilloscope: 1 GHz, 4 Analog Channels
  • 1 GHz
  • 4 analog channels
  • Easily view and analyze your signals with on the large 8.5-inch capacitive touch screen
  • Isolate signals in seconds with exclusive Zone touch triggering
  • Signal detail with the 1,000,000 wfms/s update rate
  • Capture more data with up to 4 Mpts memory
X11644A Mechanical Calibration Kit, 8.2 to 12.4 GHz, Waveguide, WR-90
  • The Keysight X11644A calibration kit contains the precision mechanical standards required to calibrate the systematic errors of Keysight network analyzers. This calibration kit has a precision airline for performing the Thru-Reflect-Line (TRL) calibration, the most accurate error-correction technique for coaxial measurements. This kit also contains a commercial calibration certificate, flush short circuit, a precision shim, and fixed termination(s).
  • Software for extraction complex value of permittivity and permeability
U2000A 10 MHz - 18 GHz USB Power Sensor
  • Frequency range of 10 MHz to 18 GHz
  • Wide dynamic range of -60 to +20 dBm
  • Internal zeroing capability to eliminate external calibration
  • High measurement speed of up to 250readings/second
  • Support internal and external trigger measurements
  • Display power measurements on a PC or other Keysight’s instruments
  • Internal triggering and trace display capability
  • (+) MAX AVG PWR 30 W
  • (+) 500W PEAK FOR 1 mks
 MFLI Lock-in Amplifier
  • DC - 500 kHz / 5 MHz, 60 MSa/s, 16 bit
  • Current and differential voltage inputs
  • LabOne toolset: Scope, Sweeper, Spectrum Analyzer, etc.
  • Plug & Play with embedded LabOne® Web Server
  • USB 2.0 and 1 GbE high-speed connections
  • AC line and DC supply (battery) operation
 3D printer BCN3D Sigmax Dual Extrusion
  • Fused Filament Fabrication (FFF)
  • Printing volume 420mm x 297mm x 210mm
  • Extruders 2
  • Layer height 0,05 – 0,5mm
  • Positioning resolution (X/Y/Z) 1,25µm / 1,25µm / 1µm
  • Extruder maximum temperature 290°C
  • Filament diameter 2,85 ± 0,05 mm

High performance work stations
CPU Intel Core i7-5960X Extreme Edition 3.00 GHz, RAM DDR4 PC17000 64GB, GPU NVIDIA GeForce GTX 750 2048M;
Two desktops with Intel Core i7-5930K 3.50 GHz, RAM DDR4 PC 17000 64GB, GPU NVIDIA GeForce GTX 980 Ti 6144M;  

56 Tflops, three computational units, CPU Intel Xeon E5-2640 v3 2.60GHz, RAM DDR4 128GB, 8 x GPU NVIDIA GeForce GTX Titan X, Storage SSD 240GB, HDD 2x2TB, Databus Infiniband 56 Гб/с;

Computer class
15 machines with CPU i5-8400, RAM DDR4 16 GB.

Если вы заметили в тексте ошибку, выделите её и нажмите Ctrl+Enter.

© 2001-2020 Московский физико-технический институт (национальный исследовательский университет)

Противодействие коррупции | Сведения о доходах

Политика обработки персональных данных МФТИ

Техподдержка сайта | API

Использование новостных материалов сайта возможно только при наличии активной ссылки на https://mipt.ru

МФТИ в социальных сетях